Own a digital cable box? We have nothing for digital cable box descrambler systems. If your cable system uses digital cable boxes, digital cable box descramblers or a digital cable signal, the unmodified cable box we sell will not work on your digital cable box descrambler system. We do not sell digital cable descramblers.



Digital set top cable boxes are not available. We have no digital cable boxes that will work on digital cable tv. No digital cable box is available. Digital cable descrambler and digital cable box will be available someday. At this time no digital cable tv box is available. Look for digital cable descrambler b


What is A Unmodified Cable Box Descrambler / Converter?

1. We offer unmodified basic channel changer types of cable box descramblers. The boxes we offer will NOT unscramble ANY pay channels, premium channels, or pay per view channels offered by ANY cable company. If you want to view pay type channels you must contact your cable company and they will provide you with a cable TV box and the services you want to pay for.
2. The cable boxes we offer are necessary if you own a Plasma TV without a tuner. If your current TV is not capable of tuning in channels offered from 01-125. If your TV remote control no longer works or the volume control is defective, installing A unmodified cable box will allow you to tune channels, control volume and turn on and off the TV set via the remote control that comes with the box.

3. Unmodified cable box descramblers act just like a VCR would. They will change your channels, tune in the signal & the cable box can also control your volume and mute and turn off your TV set via the remote control if your TV is plugged into switchable power outlet on the back of the cable box.

4. Unmodified cable box descramblers will not unscramble any pay signals.

5. Unmodified cable box descramblers can be used in extra rooms in your home.



ox in future.

CLEARVIEW USERS HANDBOOK

Troubleshooting Hints
Please try the following steps before contacting your retailer.

 

UNIT HAS NO PICTURE, POWER OR SOUND. •

Is TV & Unit plugged into a working outlet? • Is the Unit turned on?
• Is the TV turned on, If so is it turned on to channel 3 or 4 (depending on your area)?
• Are all your cables plugged in properly, and if so in the proper sequence?

TV HAS NO SOUND.
• Is the TV volume turned up?
• Is the volume on the Unit turned up?
• Is the TV and/or the Unit on "mute"?

PICTURE DISTORTION OR BLANK PICTURE
• Check video select button
• Check the 3/4 channel select
• Check channel lock, Make sure channel you are trying to see is displayed on unit.
• Make sure cables are connected properly.

REMOTE NOT OPERATING
• Check to see if the batteries are new and or in working order.
• Are batteries placed properly in unit, (according to instructions).
• Make sure TV and Unit are plugged in.
NOTE: All units are in STD mode from the factory.

CHANNEL 5 AND 6 WORK AND THE REST OF THE CHANNELS DO NOT. ALL CHANNELS WORK ACCEPT CHANNELS 5 AND 6.
• Check HRC/STD setting to make sure you are on the proper setting in
your area.
• All Units come in Standard setting. To check the setting of the unit press the menu button for one second to see if the unit displays H or S then try the opposite setting. To go to the opposite setting press the S/H button for 3 seconds, until box shows H or S.

NOTE: After reviewing and trying these steps, If the unit is still not functioning properly please contact your retailer.

If at any time you cannot remember the functions you have entered or what setting you have gone to, you can always reset the unit back to original setting by going through the following steps.

A. Unplug Unit
B. Hold the "Channel Up" & "Power" button on the unit while plugging it back in, You will see the unit display "Res" the "3" then it will click off. This means all functions and memory are erased and unit is back to its original factory setting.