PIONEER BA-5135/BA6110 INSTRUCTION
OPERATING INSTRUCTIONS:
1.) Connect the power cord from the DPV.5 converter to your 110vAC outlet.

2.) Connect the output cable from the jack on the converter to your TV or
VCR.

3.) Connect the input cable to the input jack.

4.) Turn your TV to channel 3.
CHANNEL MAPPLNG

Your converter is equipped with a channel mapping switch. This is the toggle switch located on the rear of the unit. Flip the switch to the side marked 'm" ( map ) until all channels are coming in descrambled and in the correct order. This can take less than a minute to a few hours,it just depends on the system. Once everything is correct, flip the switch back to "r' ( run)

PARENTAL CONTROL:

Unit on. Enter channel. Push the pc button on the box or remote. Enter other channels with the PC the same way. Flip parental control switch in back of box to upward position towards parental control. Must remove lock to view or add and remove channels from memony.

LOCKED UP:

If your converter ever locks up( this means that even though you change, the converter will not respond to the remote) unplug the unit for 14 minutes. The converter should reset to normal operation upon plugging it back in.

INSTRUCTIONS for BOTH MODELS PIO 6110 - 6310